Depending on the generation of the car and its year of manufacture, as well as on its trim level, these components vary in shape, size, as well as the presence of mounting holes for parking sensors, fog lights, washer nozzles, and a tow hitch. Therefore, make sure whether the particular component fits your vehicle before you buy it.
Are all components for this vehicle the same colour?
Parts with a rough surface are usually black and do not require any further painting. Smooth ones are intended for further painting them any colour.
Used components can be of various shades and colours. However, due to limited choice, buying a component of the required colour isn’t always possible.
Is a bumper for the 1.5 l Mazda 2 (DL, DJ) hatchback compatible with my 1.6 l Mazda (DE, DH)?
Parts for these vehicles have different designs and aren’t interchangeable. In particular, they differ in the shapes of radiator grilles, air intakes and the position of fog light mounting holes.
How can I extend the service life of the spares?
To protect the component from damage, you can have it covered with polyurethane or vinyl film. It protects the paintwork against small scratches and chips. It is better to get garage specialists to perform this task.
Another way of preserving the looks of the bumper is by treating it with a polish based on wax, epoxy resin or PTFE. These products protect against ultraviolet, organic contaminants, water, and dirt.
“Liquid glass” coating based on sodium and potassium silicates ensures the lasting integrity of the paintwork. On the surface, it forms a durable transparent film that preserves its performance characteristics for up to 2 years.
Can I install a bumper on a Mazda 2 myself?
It would be easier to tackle this task with a helpmate. To remove the part, take out the clips located under the bonnet and in the bottom part of the component itself. Undo the screws near the headlights. Then, having turned the wheels to one side first and then to the other, detach the component from the wheel arch liners, disengage the plastic tabs from the wings and remove the element from the guides by carefully pulling it towards you.
