BEEPER RE004I Parking sensors kit Number of sensors: 4

The BEEPER RE004i is a simple and efficient parking aid system, which alerts the driver when reversing. As parking has become an increasingly important daily constraint, the BEEPER RE004i will ensure your comfort and safety during each of your maneuvers.
re004i


For an increased comfort
The buzzer of the BEEPER RE004i can be placed in the trunk or in the passenger compartment of the vehicle.
re004i

Composition of the kit


Main functions
- Sensors with integration through the inside of the bumper (either original finish, flush sensor)
- 6 levels of alert
- Progressive sound alert by BEEP
- Volume switch (mini/maxi)
- Adjustable buzzer sound level
- Buzzer sound alert in the trunk
- Anti-error detection system (rain, snow...)
- 100% compatible installation without risk
- 2,5m of cable

More security
The BEEPER RE004i is equipped with 4 ultrasonic sensors for an optimal detection zone, it detects all obstacles, reduces the risks of collisions and related repair costs. So be confident when maneuvering, exiting parking lots, garages, etc ... As soon as you put the car in reverse, the 4 sensors detect the presence of potential obstacles at the rear of the vehicle.

As you approach an obstacle, the beeps get closer and closer. When the signal becomes continuous, your bumper is within a foot of the obstacle. No more risk of damaging the rear of your vehicle.
re004i

Sensor Installation

The sensors must be placed at least 50cm from the ground. Indeed, sensors placed lower will detect the ground, which will generate unwanted triggers.

If you have a commercial vehicle, sports car or other vehicle with a lowered bumper, we have a solution for you. You have the possibility of ordering specific sensors with angles which allow an installation more basic; with 43cm of the ground. Access to the product sheet by clicking HERE.

Adjustment of the detection field

Thanks to the BEEPER RE004i, parking becomes a child's play.

The sensors can be covered with a veil of paint for a perfect finish.

WARNING - VEHICLES PROHIBITING THE CONNECTION OF A CONSUMER TO THE REVERSING LIGHT HARNESS
On some vehicles, the +12 V Backup Light is interfered with when the engine is running, which can disrupt the proper operation of the Backup Radar Kit. In other cases, this +12 V Backup Light does not allow any additional consumer.
For all these vehicles, Beeper has developed the RCANR2 module to retrieve the +12 V Backup Light information from the CANBUS network. This module connects to the CANBUS of the compatible vehicle and delivers a +12V Backup Light for the connection of a backup camera.
You can find this module canbus RCANR2 by clicking HERE
Product not compatible with a metal bumper

The BEEPER RE004i is of course a complete kit, delivered with all the necessary accessories for the assembly, as well as a simple and clear instructions for use/assembly.