Wiper blade FORD KA and other car parts Wiper and washer system
Wiper motor
Windscreen wiper arm
Windscreen washer pump
Wiper linkage
Windscreen washer reservoir
Screenwash
Wiper blade rubber
Engine oil
Top car parts catalogue FORD KA
Brake discs
Shock absorber
Brake pads
Control arm
Clutch kit
Oil filter
Wheel hub
Turbo
Wheel bearing
Brake caliper
Air filter
Lambda sensor
Timing belt kit
Coil spring
Fuel filter
What types of wiper blades are fitted on a Ford Ka?
All types of the components are compatible with this car: conventional, flat and hybrid. The first ones ensure a secure fit and are inexpensive at the same time. However, they are not durable and can work erratically when driving at high speeds. Flat wipers look more appealing and do not tend to frost up but aren’t the best in terms of quality of cleaning and cost more. Hybrid items are characterised by high downforce and excellent aerodynamic properties due to their cover. They are expensive.
Depending on the vehicle’s year of production, these components can have the following dimensions: 483–610 mm on the driver’s side, 356–432 mm on the passenger’s side, 279–406 mm on the rear window. To attach them, 9×3 and 9×4 Hook or J-Hook connectors are used.
Why do my vehicle’s wiping elements squeak?
The most common causes of strange noises include severe contamination, poor-quality rubber element, incorrect mounting, a faulty motor, an overstretched wiper arm spring or a bad bushing.
Why do you need to change windscreen wiper blades on your Ford Ka?
The elastic working element as well as the ball joints of the linkage can break down. The service life of the components reduces significantly when they are used without water or on icy surfaces. In that case, cracks appear on the rubber elements, which might cause scratches on the windscreen. Poor-quality cleaning reduces visibility when driving and might even lead to a collision.
How often do you need to change the components on a Ford Ka?
This must be done once or twice a year. The exact lifespan depends on whether the windscreen is intact and also on the serviceability of the washer and the quality of the liquid used.
Can I replace windscreen wiper blades on this vehicle myself?
This procedure is quite easy so you can cope with this task. Lift the arms and undo the clips. Pull the components out through the hole in the fastener. Fit the components in the reversed order. Make sure they are properly secured and put them back in their working position carefully. Check that they are working properly.
