Dial indicators
- Gauge: with analog display
- Measuring Range from [mm]: 0
- Measuring Range to[mm]: 10
- Scale: Metric
- Measurement Accuracy +/- [mm]: 0.01
- Diameter, measuring pin [mm]: 8
- Diameter: 55
- Condition: New

- Length [mm]: 110
- Width [mm]: 0 - 25,4
- Voltage [V]: 1,5
- Measuring Range [°C]: 0–40
- Features: digital
- Condition: New
- Gauge: with LCD display
- Measuring Range from [mm]: 0
- Measuring Range to[mm]: 12,7
- Scale: Metric, Imperial
- Measurement Accuracy +/- [mm]: 0,01
- Packaging: Plastic Case
- Diameter: 57
- Condition: New

- Packaging: Plastic case
- Gauge: with analog display
- Scale: Metric
- Scale Division [mm]: 0-10
- Features: magnetic, flexible arm
- Scale Division [in]: 0-1
- Surface: Polished
- Condition: New
- Gauge: with analog display
- Diameter, measuring pin [mm]: 8
- Scale Division [mm]: 0.01
- Scale Length [mm]: 10
- Scale: Metric
- Housing Diameter [mm]: 55
- Condition: New
- Measuring Range to[mm]: 10
- Diameter [mm]: 60
- Measurement Accuracy +/- [mm]: 0,01
- Shaft diameter [mm]: 8
- Gross Weight [kg]: 0,144
- Condition: New
- Also available as set
- Net weight [kg]: 0,1
- Condition: New

- Vehicle type: VW Touareg 2003, VW Transporter 2004
- Block 1.12 [engine from_to]: 2.5TDi
- suited for engine type: Diesel
- Number of Cylinders: 5
- Condition: New
- Gauge: with analog display
- Housing Diameter [mm]: 41
- Measuring Range from [mm]: 1
- Measuring Range to[mm]: 8
- Scale Division [mm]: 0,01
- Condition: New
- Weight [g]: 260
- Moisture protection: with splash-water protection
- Gauge: with analog display
- Packaging: Plastic case
- DIN/ISO: DIN 878
- Measurement Accuracy +/- [mm]: 0,01
- Measuring Range from [mm]: 0
- Measuring Range to[mm]: 10
- Material: Steel
- Chemical Properties: Rust-free
- Diameter 1 [mm]: 60
- Condition: New
- Packaging: Wooden Case
- Diameter [mm]: 55
- Measuring Range from [mm]: 50, 160
- Measurement Accuracy +/- [mm]: 0.01
- Condition: New

- Measurement Accuracy +/- [mm]: 0,01
- Quantity Unit: Piece
- Measuring Range [mm]: 0 - 10
- Head Diameter: 8 mm
- Condition: New
- Measuring Range from [mm]: 0
- Measuring Range to[mm]: 5
- Diameter [mm]: 40
- Scale Division [mm]: 0,01
- Number of Parts [parts]: 1
- Suitable for vehicle type: PC (passenger car), CV (commercial vehicles)
- Net Weight [g]: 80
- Measurement per pointer revolution [mm]: 0,5
- Condition: New
- Fitting Position: Rear
- Weight [kg]: 0,027
- Condition: New

- Measuring Range [mm]: 160-360
- Material: Carbon steel
- Scale: Imperial, Metric
- Condition: New
- Magnetic Foot Height [mm]: 370
- Magnetic Foot Length [mm]: 64
- Magnetic Foot Width [mm]: 50
- Supplementary Article / Supplementary Info Info 2: Magnetic
- Gauge: without Display
- Condition: New
- Magnetic Foot Length [mm]: 64
- Magnetic Foot Width [mm]: 50
- Supplementary Article / Supplementary Info Info 2: Magnetic
- Shape: Flexible
- Magnetic Foot Height [mm]: 385
- Gauge: without Display
- Condition: New
- Article number of recommended accessories: 03.9304-0034.2
- Condition: New
- Also available as set
- Net weight [kg]: 1,53
- Condition: New
A dial gauge is used tdetect deviations in size and shape of wheel hubs, rollers, pulleys, brake discs. This tool of a clock type is attached ta part sthat the tool’s measuring tip contacts it. After that, the part is rotated by hand. The pointer of the built-in dial face moves if there are any irregularities on the component’s surface and shows the size of the disclosed defect. With such a device you can check the state of many components and make an objective decision whether treplace them or not.
Types
Tools offered in the catalogues differ in:
- Measurement range. It can be 5, 8, 10, 30 mm, etc. The higher this parameter, the higher the measuring force.
- Dial graduation. In particular, there are tools which can detect size deviations up tthe tenth or hundredth of a millimetre.
- Type of housing. It can be:
- standard;
- dustproof;
- waterproof.
As holders for this tool, racks, stands and brackets are used. It is possible teither order online an instrument which is supplied together with a stand or tbuy a holder separately.
Dial gauge: maintenance tips
- Follow the manufacturer’s instructions while using the device. Before each use, wipe it dry and examine for damage.
- Clean contacting surfaces from dirt, oil and rust thoroughly. This will help you tavoid inaccurate readings.
- Prevent the contact tip from the impact of aggressive chemicals.
Professional help from Buycarparts.co.uk
Would you like tbuy a dial gauge, compass, tape measure or other tools cheaply? Low prices for all items are waiting for you in our online shop. Besides, we often give discounts for popular products. Don’t miss your chance tmake a bargain purchase today!