CARPOINT 0177825 Jump leads with overvoltage protection

Carpoint Jumper Cable | 25 mm², with overvoltage protection

These Carpoint jumper cables are the solution if the car doesn't want to start anymore due to an empty battery. Suitable for use with 12 V and 24 V batteries. The cables are colour coded (red and black) and have a length of 3.5 metres. They are 25 mm2 thick. For pretrol cars with an engine displacement of up to 2500cc. The clamps are fully insulated. TüV/GS approved.

Connecting the jumper cables:

• Connect the red cable to the "+ " terminal of the empty battery.
• Connect the other red clamp to the "+" terminal of the donor car battery
• Connect the black cable to the "-" terminal of the donor car battery.
• Place the other remaining black clamp to a ground point on the vehicle with the empty battery, such as a metal part of the engine or an unpainted car body part.

Once you've done this, start the engine of the donor vehicle and then start the engine of the vehicle with the empty battery. The jumper cables should be disconnected in reverse order.

After use, store the Carpoint jumper cables in the case provided and keep them in the car so that you always have them at hand.