BEEPER RVUX-C5N Reversing camera kit

The BEEPER RVUX-C5N is a flexible micro-camera ideal for commercial vehicles. Its compact size and its flexible plastic shell, make its installation practical and give it a reinforced waterproofness to the test of time and years.

Composition of the kit

A. Flexible micro-camera (x1)
B. Adhesive tape for soft camera (x1)
C. RCA connector (x1)
D. 12 m. cable extension. (x1)
E. Tube of sealant (x1)

Dimensions

The dimensions of the flexible micro-camera are: 48 x 31 x 18 mm

Distance visualization templates

WHITE loop = Backup distance templates

White loop closed = VISIBLE templates (original selection)
White loop open (cut) = templates NOT VISIBLE

/! The selection of this option is made with the camera not powered.

Note: The original selection is made for a camera positioned "horizontally", a screen fixed or glued from above & in reverse camera version (visible templates). To change the state of the loop, please disconnect the camera first, then reconnect it after the operation.

Installation of the camera on the vehicle

The adjustable angle of the camera allows you to position it in two different places on the vehicle, according to your choice or a technical constraint: on the top of the body (at the level of the upper brake light, see diagram A below) or on the bottom of the body (at the level of the plate light, see diagram B below).

/! If the camera is installed vertically, be sure to fill the hole at the top with the adhesive provided, to reinforce the seal and prevent water from entering the vehicle by capillary action.

WARNING - VEHICLES THAT DO NOT ALLOW A CONSUMER TO BE CONNECTED TO THE REVERSE LIGHT HARNESS
On some vehicles, the +12 V reversing light is interfered with when the engine is running, which can disrupt the correct operation of the reversing camera kit. In other cases, this +12 V Backup Light does not allow any additional power consumption.
For all these vehicles, Beeper has developed the RCANR2 module to retrieve the +12V Backup Light information from the CANBUS network. This module connects to the CANBUS of the compatible vehicle and delivers a +12V Backup Light for the connection of a backup camera.
You will find this module canbus RCANR2

The BEEPER RVUX-C5N is of course a complete kit, delivered with all the accessories necessary for the assembly, as well as a simple and clear instruction manual.