Car Shock Absorber Dust Cover Top quality for a top price
Shock Absorber Dust Cover - popular manufacturers
  • Top Price guarantees high-quality Shock Absorber Dust Cover at very attractive prices.
  • Shipping costs
    Free shipping within UK applies to orders that exceed £ 140 except when ordering bulky items, tyres or exchange parts.
  • Wide choice
    At the moment our product range is over 500000 car parts
  • Fast delivery!

    Shipping method

    Great delivery! You will receive your Shock Absorber Boot autoparts order within several working days

  • COMODO - pay securely for Shock Absorber Dust Cover & Bump Stops
  • Auto Shock Absorber Gaiter & Bump Stops Spare parts paid via Visa
  • Car Shock Absorber Boot & Bump Stops Spare parts paid via MasterCard
  • Spares Shock Absorber Dust Cover %CRITERIA_VALUE% - pay with Discover
  • Vehicle Shock Absorber Boot Spare parts paid via PayPal
  • Pay for Shock Absorber Boot by Bank Transfer

Replace a Spare part Shock Absorber Dust Cover & Bump Stops – a defective one or if the limit of use has been already reached. Find out useful information about Shock Absorber Dust Cover & Bump Stops

Dust gathering and getting on auto parts, disturbs and increases wear. In order to protect car components from dust, it is necessary to protect such parts as fillers, hydraulic brakes and clutch. Transparent bags, made of film and rubber around the chamber help to protect them. This provides protection of hydraulic drives. Concerning the level of fluid, it will be visible through a transparent bag. So, you'll be sure what parts of the car are protected.

When speaking about dust protection of car elements, it is also necessary to speak about crankcase ventilation system. Dust gets inside through the inspection hole of the oil meter. As for the modern cars, this hole is well sealed. But old car models were designed differently and they did not have such a seal. Some car owners of old cars make a protection from a rubber tube and a cap.

If you drive your car mostly on very dusty roads, your car is definitely worth to be protected from dust and dirt. First, this concerns ignition distributor. Some motorists in such cases wrap the distributor with a cloth. In this case it is necessary to collect all the wires together and to tie them with a cord. Replacement with a cloth is not suitable, because the distributor will collect moisture, which certainly will affect the performance of the entire ignition system.

Modern protection from dust you can always order in our online store, along with such details as air conditioning compressor, belt pulley or timing belt. To make sure that we offer the best prices, look our catalogues and you will definitely find what you need.

Shock Absorber Dust Cover & Bump Stops for MAZDA 3 (BK), HYUNDAI ACCENT II Saloon (LC), BMW 3 Coupe (E46)

Faults of shock absorber protection boot
  • mechanical damage (cracks, holes) to the dust boot;
  • dismount of the dust boot from castellated cap;
  • clogging and contamination of the part;
  • normal wear of the dust boot;
  • dust boot fixtures fault.
Symptoms of shock absorber dust protection failure
  • creak or rattle of shock absorbers during movement;
  • at speeds above 80 km/h the car sways;
  • external worn condition of the dust boots.
Causes of shock absorber dust boots faults
  • use of non-original or non-conforming parts and consumables;
  • use of low-quality components;
  • dust boot damage due to small stones strikes while driving;
  • improper part installation;
  • looseness of mountings.

Dust boots should be checked by an inspection. Be sure to assess the state of mountings and check the part for mechanical damage.

Remember that untimely replacement of a damaged dust boot can cause severe damage to shock absorbers and struts of the car.

Average life of a shock absorber dust boot is 20 000-30 000 km or 1-2 years of operation. For normal operation of the shock absorbers it is recommended to inspect the dust protection mechanism at least once every 3 months.

Replacing shock absorber dust boots

If damage occurs, the dust boot is not subject to repair, so it only requires replacement. To remove the damaged part and install a new one, you first need to completely remove the shock absorber with the dust boot and the bump stop. Next you need to remove the boot from the slot and remove it from the castellated nut. After that, you need to clean the mechanism from dirt. Next, a new part is installed, and the construction itself is reassembled.

Replacement of the boot requires efforts of several people and presence of special tools. For the part to last a long time, it is strongly recommended to install the original shock absorber dust boots.

Your cart is empty