Car Coolant Hose Top quality for a top price
  • Top Price
    Buycarparts.co.uk guarantees high-quality Coolant Hose at very attractive prices.
  • Shipping costs
    Free shipping within UK applies to orders that exceed £ 140 except when ordering bulky items, tyres or exchange parts.
  • Wide choice
    At the moment our product range is over 500000 car parts
  • Fast delivery!

    Shipping method

    Great delivery! You will receive your Radiator Hose (Coolant Hose) autoparts order within several working days

  • COMODO - pay securely for Radiator Hose (Coolant Hose)
  • Auto Radiator Hose (Coolant Hose) Spare parts paid via Visa
  • Car Radiator Hose (Coolant Hose) Spare parts paid via MasterCard
  • Spares Coolant Hose %CRITERIA_VALUE% - pay with Discover
  • Vehicle Radiator Hose (Coolant Hose) Spare parts paid via PayPal
  • Pay for Radiator Hose (Coolant Hose) by Bank Transfer

Replace a Spare part Radiator Hose (Coolant Hose) – a defective one or if the limit of use has been already reached. Find out useful information about Radiator Hose (Coolant Hose)

It is very important when replacing hoses the parts to be only original ones. If you replace the hoses all by yourself, it is also necessary to replace hose clips. Vacuum hoses often have a different arrangement. It all depends on the year of construction and equipping of the drive. Therefore, before removal it is recommended to mark the necessary pipelines with a tape.

Before you change the coolant hose, be sure that the radiator is dry. First you need to drain the coolant from the system. Then loosen hose clips. Next, unscrew the locking bolts and squeeze the clips drive pieces with pliers. Now it is time to disconnect the hoses. If the clips are firmly seated, then gently pushing screwdriver between the hose and the clip, loosen their fit. Try to put new hoses so that the fittings quite firmly and deeply to seat in them and the pipes not to slip. Then just tighten hose clips. One more trick: in order easily to put on the coolant hoses, in places of joints you can lubricate the ends of the pipes with a thin layer of soap.

But keep in mind that to replace a split hose of the cooling system is possible to do by yourself only in very rare cases. It will be better carefully to drive to the nearest service centre, where the experts will assist you. All the necessary parts that need replacing you can buy in our online store. You need just to visit our site, to select the desired item and to order it at very competitive price. If you need parts such as brake hose, air conditioner wiring and control arm, we will be glad to deliver them to you in the shortest possible time.

Radiator Hose (Coolant Hose) for FIAT PUNTO (188), FIAT PALIO Weekend (178DX), FORD ESCORT VII Estate (GAL, ANL)

Faults of coolant hoses
  • loosening of the clamp;
  • displacement of the hose;
  • coolant leak;
  • pipe wear;
  • cracks in the hose;
  • blockage of the component;
  • breakage (rubberized hoses);
  • hose twisting.
Symptoms of coolant hoses failure
  • increased vibration and overheating of the engine;
  • loss of engine power;
  • increased fuel consumption;
  • antifreeze smell in the cabin;
  • engine overcooling.
Causes of coolant hoses faults
  • thermal impact;
  • ingress of reactive substances on the item;
  • untimely service of the cooling system;
  • installation of low-quality auto parts;
  • wear;
  • improper maintenance of the system.
Diagnosis of coolant hoses

If you find the above faults you should first make an inspection. Chances are good that you'll be able to detect damages by yourself, cracks, streaks, and so on. It makes more sense to carry out preventive diagnosis each time you replace the coolant. Depending on the model of your car the time period may vary. The average is every 30 thousand kilometers of run or once in 10 years.

Replacing the coolant hoses

Due to a relatively low cost, in the case of malfunction it is wiser to replace this part. Doing it is pretty simple:

  • Drain the antifreeze (if the collected fluid is clean, it can be reused).
  • Loosen the clamp and move it along the hose in the opposite direction from the connection.
  • New hoses are quite easy to remove (otherwise, grasp the hose closer to the junction and try to take it off, making a rotational movement).
  • Lift the edge of the hose effortlessly avoiding damage to both the hose and its attachment points.
  • In the worst case, you can cut the hose along the line of clamp print.
  • Remove the hose.
  • Proceed with the installation of a new hose.
  • If the new part fits in the place tightly, clean pipe of dirt and use soapy water to quickly install the hose.
  • In the case of flexibility loss, the hose should be immersed for a while in hot water.
  • Install a hose on the socket.
  • Make sure that the part is correctly installed.
  • Install the clamp.
  • Fill the cooling system with liquid.
  • Check hose connections for leaks.

We remind you that you can disconnect the hoses only after the system has cooled in order to avoid burns.

Basket
#
Your cart is empty