Find up-to-date offers for other spare parts for Gaskets and sealing rings
Cylinder head gasket
Rocker cover gasket
Crankshaft seal
Turbo gasket
Exhaust manifold gasket
Oil sump gasket
Valve stem seals
Oil cooler gasket
Timing cover gasket
Egr valve gasket
Oil drain plug gasket
Camshaft seal
Thermostat gasket
Seal, automatic transmission oil pan
Oil pump gasket
Sunroof seal
Seal, combination rearlight
Replace a Spare part Inlet manifold gasket – a defective one or if the limit of use has been already reached. Find out useful information about Inlet manifold gasket
An intake manifold gasket serves for pressurization of engine connection with an intake line.
3 tips on intake manifold gasket operation
Replace the gasket every time you dismount the intake manifold: it is a consumable.
For improvement of sealing properties, apply a thin layer of graphite lubricant to both sides of the part.
Tighten bolts of the intake manifold according to recommendations given in technical documentation of the vehicle. In most cases, tightening should be performed from central fastenings to outer ones with a torque of 16-23 Nm. Otherwise, the gasket may deform or tear.
Defects of the intake manifold gasket, their causes and signs
Warping. It occurs as a result of temperature changes, for example, in case of ingress of cold water on the surface of the extremely heated manifold. This leads to depressurization of the connection, signs of which are: lowering of the engine power, specific sound from under the hood, unstable operation of the engine at idle speed, increasing of fuel consumption.
Tear. Its causes are: low quality of the component, increased vibrations of the engine or errors during installation. According to localization, apart of the signs noted above, it may be manifested as stains of oil or cooling liquid in the intake manifold area.
Deformation. It may be caused by distortion of the cylinder head or the surface of the intake manifold. Sometimes it occurs in case of usage of poor-quality or too aggressive agents for components fixation, and also due to the influence of extremely high temperature, for example, when the manifold overheats. It is accompanied by the gasket squeezing-out, which may be indicated by any signs, noted above.
We recommend to buy intake manifold gasket on Buycarparts.co.uk website: thanks to a wide assortment you will be able to easily and quickly find a spare part most suitable for your car.
