Plastic glues
- Pressure [psi]: 3500
- Packing Type: Tube, Blister Pack
- Capacity [ml]: 25
- Temperature range to [°C]: +93
- Mounting Time [min]: 15
- resistant to: Water
- Type: two-component
- Colour: transparent
- Area of use: bumper, spoiler
- Properties: waterproof, heat resistant
- Temperature range from [°C]: -40
- Condition: New
- Weight [g]: 50
- Colour: transparent
- Condition: New
- Chemical Properties: Grindable, Oil resistant, Over-paintable
- Packing Type: Cartridge
- Capacity [ml]: 24
- Temperature range [°C]: -40°C +140°C
- Mounting Time [min]: 1
- Type: two-component
- Colour: black
- Area of use: bumper, spoiler
- Properties: high-temperature grease
- Condition: New
- Chemical Properties: Grindable, Oil resistant, Over-paintable
- Packing Type: Cartridge
- Capacity [ml]: 50
- Temperature range [°C]: -40°C +140°C
- Mounting Time [min]: 1
- Type: two-component
- Colour: black
- Area of use: bumper, spoiler
- Properties: high-temperature grease
- Condition: New
- Chemical Properties: Over-paintable, Grindable
- Packing Type: Tube
- Capacity [ml]: 300
- Mixing Ratio: 1:1
- Temperature range to [°C]: +80
- Mounting Time [min]: 20
- Type: two-component
- Colour: transparent
- Area of use: bumper, spoiler
- Properties: heat resistant, waterproof
- Condition: New
- Capacity [ml]: 150
- Colour: transparent
- Area of use: bumper, spoiler
- Properties: waterproof
- Type: two-component
- Condition: New
- Capacity [ml]: 150
- Colour: metallic silver
- Supplementary Info: AUTO COLOR 10-0125 silver metallic 12 ml
- Area of use: bumper, spoiler
- Properties: waterproof
- Type: two-component
- Condition: New
- Version: ULTRA LINE
- Product line: FULLER 100
- Packing Type: Tin
- Capacity [ml]: 800
- Colour: graphite grey
- Mixing Ratio: 5+1
- Area of use: spoiler, bumper
- Properties: waterproof
- Type: one-component
- Condition: Remanufactured
- Capacity [ml]: 400
- Packing Type: aerosol
- Colour: transparent
- Area of use: bumper, spoiler
- Properties: waterproof
- Type: one-component
- Condition: New
- Packing Type: aerosol
- Capacity [ml]: 150
- Quantity Unit: Millilitre
- Observe technical data
- Observe mounting information
- Colour: transparent
- Drying time of [min.]: 10
- Area of use: bumper, spoiler
- Properties: waterproof
- Type: one-component
- Condition: New
- Capacity [ml]: 400
- Colour: transparent
- Supplementary Info: CST5406
- Area of use: bumper, spoiler
- Properties: waterproof
- Type: two-component
- Condition: New
- Capacity [ml]: 400
- Colour: transparent
- Area of use: bumper, spoiler
- Properties: waterproof
- Type: two-component
- Condition: New
- Packing Type: Bottle
- Contents [g]: 3
- Quantity Unit: Gram
- Colour: transparent
- Temperature range from [°C]: -40
- Temperature range to [°C]: +85
- Tightening Torque [N/mm²]: 25
- Bonding gap, up to [mm]: 0,05
- Consistency (property): Thin
- Chemical Properties: hardening, Silicon-free
- Observe technical data
- Observe mounting information
- Area of use: bumper, spoiler
- Properties: waterproof
- Type: one-component
- Condition: New
- Packing Type: Tube
- Capacity [ml]: 25
- Universal: Yes
- Mounting Time [min]: 10
- Colour: grey
- Area of use: spoiler, bumper
- Properties: waterproof
- Type: one-component
- Condition: New
- Packing Type: Bottle
- Contents [g]: 10
- Quantity Unit: Gram
- Colour: transparent
- Temperature range from [°C]: -40
- Temperature range to [°C]: +85
- Tightening Torque [N/mm²]: 25
- Bonding gap, up to [mm]: 0,05
- Consistency (property): Thin
- Chemical Properties: hardening, Silicon-free
- Observe technical data
- Observe mounting information
- Area of use: bumper, spoiler
- Properties: waterproof
- Type: one-component
- Condition: New
- Packing Type: Bottle
- Capacity [ml]: 20
- Colour: transparent
- Temperature range from [°C]: -40
- Temperature range to [°C]: +85
- Tightening Torque [N/mm²]: 25
- Bonding gap, up to [mm]: 0,05
- Consistency (property): Thin
- Chemical Properties: hardening, Silicon-free
- Observe technical data
- Observe mounting information
- Area of use: spoiler, bumper
- Properties: waterproof
- Type: one-component
- Condition: New
- Packing Type: Cartridge
- Capacity [ml]: 50
- Colour: transparent
- Area of use: bumper, spoiler
- Properties: waterproof
- Type: two-component
- Condition: New
- Packing Type: Cartridge
- Capacity [ml]: 50
- Colour: transparent
- Area of use: bumper, spoiler
- Properties: waterproof
- Type: two-component
- Condition: New
- Capacity [ml]: 50
- Length [mm]: 115
- Width [mm]: 46
- Packing Type: Tube
- Colour: grey
- Area of use: bumper, spoiler
- Properties: waterproof
- Type: two-component
- Condition: New
- Capacity [ml]: 200
- Universal: Yes
- Packing Type: Cartridge
- Quantity: 1
- Chemical Properties: Over-paintable
- Mounting Time [min]: 15
- Colour: grey
- Area of use: spoiler, bumper
- Properties: waterproof
- Type: two-component
- Condition: New
Plastic components often break. It is not always efficiently to replace them with new ones, because in most cases a high quality plastic adhesive can solve the problem. For instance, it is used for repairing bumpers, front panel and various decorative elements.
Types of plastic adhesives
According to the production form, there are single- and two-component products. The first ones are sold as ready to use; the second ones require adding the hardener, which is supplied in a separate pack.
- Cyanoacrylic or cyanoacrylate. Products of this category do not contain solvents and are perfect for small parts.
- Polyurethane. It is moisture resistant, thus it can be used for performing external works.
- Epoxy. The parts to be bonded must not be pressed when using such glue. And application of thin layer of adhesive is necessary to get the durable coat.
Composition
The components list depends on the product type. Thus, the epoxy resin and hardener are used in the epoxy adhesives. As a rule, polyaminoamide, organic acids, anhydrides are used as the latter. The polyurethane products are produced, accordingly, on the basis of polyurethane. Also the products can include solvents.
Tips on plastic adhesive use
Use selected product in accordance with the manufacturer recommendations. Necessarily specify, if the product is compatible with the plastic type the component is made of. As a rule, the surface should be cleaned from dust and deoiled before application of the adhesive.
Usually, when using two-component products, the ingredients should be mixed very quickly, for example, in a minute. It is recommended to as fast as possible remove residues of the adhesive, which appeared after parts connection. A clean cloth is convenient for this.
Follow the product storage conditions, specified by the manufacturer. For instance, for some adhesive types, only dry rooms, where the temperature is maintained in +2 – +8 °C range are suitable.
Buycarparts.co.uk professional assistance
The widest assortment of car care products is presented in our catalogue. If you want to buy the plastic adhesive inexpensively and quickly right now – select a suitable product in Buycarparts.co.uk online-shop and fill the simple ordering form. We constantly hold promotions, thanks to which high-quality production can be purchased at the most profitable price. Make an order today – and you will assess the advantages of our online-shop.