Find up-to-date offers for other spare parts for Brakes
Brake discs
Brake pads
Brake caliper
Drum brake
ABS sensor
Brake caliper repair kit
Handbrake
Brake disc back plate
Brake fluid
Brake master cylinder
Brake pad wear sensor
Brake shoes
Brake hose
Brake caliper carrier
Brake drum
Handbrake cable
Brake vacuum pump
Handbrake shoes
Brake pad fitting kit
Brake servo
Wheel cylinder
Brake set, drum brakes
Brake shoe fitting kit
Brake discs and pads
Brake light switch
Brake shoe adjuster
Reluctor ring
Brake caliper piston
Brake power regulator
Brake pipe
Replace a Spare part Brake caliper bolt – a defective one or if the limit of use has been already reached. Find out useful information about Brake caliper bolt
Brake calliper guide pins secure the brake calliper and enable its motion when pistons move out of the cylinders to press a pad to the disc. Usually, callipers have two attachment points, i.e. they require two fastening elements.
6 tips on how to use and replace them
In order to ensure flawless operation of the components, every time you replace brake pads use a special lubricant that withstands high and low temperatures and exposure to brake fluid.
It is recommended to examine the guides when new pads are fitted. Manufacturers do not limit the lifespan of these fasteners: it mainly depends on the quality of the applied lubricant.
During the inspection, make sure that dust boots are in a proper condition. If there are any cracks or tears on these protective covers, they have to be replaced immediately.
When new spares are being mounted it is necessary to apply the tightening torque stated by the manufacturer.
In order to fix malfunctions, you can buy brake calliper guide pins together with dust boots, plastic sleeves and brackets in a kit.
After the unit has been assembled, make sure that fasteners can move as freely as before and all components function properly.
Malfunctions of brake calliper guide pins, their causes and symptoms
Corrosion spots. They appear after exposure to moisture and dirt, usually, due to torn dust boots. Another cause of oxidation is an inappropriate lubricant. There are no obvious symptoms of this damage: it can be detected only at inspection.
Deformation. Most often, it is caused by loads on a wheel when driving the car on uneven roads. These include vibration and impacts, for instance. Symptoms of the malfunction are components sometimes getting stuck as well as squalling and other extraneous sounds. Besides, there is a high probability of uneven and premature wear of the discs.
Damaged thread. This happens if the elements were overtightened during mounting, and causes them to loosen. You will notice a free play in the calliper and knocking.
Buycarparts.co.uk - an ideal place to buy car parts
In our online shop, you can buy brake calliper guide pins at affordable prices. Products offered in our catalogue are relatively inexpensive. There are special offers on many of the items that help to save. Forget about overpaying – order high-quality parts online today.
